How to burn .bin .cue and .iso files.

1. You will need to download and install Nero 
(you can grab it here: http://www.lamerc.com/users/onji/Nero_5.5.10.0.zip)
2. Use the Serial number in the zip to register it.

3. First, for .bin and .cue files, these work together, you must have them in the
   same directory.
4. Start up Nero and close the wizard that comes up. Then click 'File' at the top
   then click 'Burn Image'
5. Browse out to the .cue file and click 'open'.
6. Turn off simulation mode, and make sure its on 'Disk at once' then click burn.
7. It will burn the cd for you from the .cue and .bin file.

8. For .iso's you use the same procedure as the above, you just dont need a .cue file. 
   Just point it to the .iso file.